How to Fix Critical_Process_Died Error in Windows

One of the most commonly occurring errors in Windows OS is the Blue screen of death. That can be caused by any hardware or software problem. One of the BSOD errors is “Critical_Process_Died” problem. You encounter this error when a process of Windows identifies some modifications in its data, and it stops working. Don’t worry at all. There are many fixes you can apply to get out of this error. I am going to discuss here all of the authentic and handy solutions to solve this error. Let’s move towards the guide.

Solution # 1: Run SFC Scan [Most Working Solution]

There may be a corrupt system file that’s why you encounter this error. So, you need to detect and fix that corrupt system file by using the System File Checker. Follow the steps below to run SFC utility.

  • Go to the “Start” button and right-click on it. From the context menu, select “Command Prompt (Admin).
    CMD Admin in Start
  • Now type “sfc /scannow”, and press Enter to begin the scan.
    System File Checker scanningThe SFC utility will show you the percentage of checked files on the screen. It should go up to 100%. So, do not close the window and have some patience until it finishes the scan.
  • Once the scan is over, close the window and reboot the system.

Solution # 2: Run Antivirus Scan

There may be a deadly virus that is causing this error. So, run the antivirus “Full System Scan” to detect and remove any virus from your system.
AVAST Scanning System

Solution # 3: Go to the Previous Update

According to some users, they encountered this error when they installed the latest update of Windows 10. Hence, uninstall the latest update you have installed just now and move to the previous build.

  • Click the “Start” button and select “Settings” from here.
    Settings in Start Menu
  • Here, select the category “Update & Security” from the list.
    Update & Security in Settings Menu
  • In this section, click “Recovery” in the left pane to view its content. In the right pane, you will see the category “Go back to an earlier build” with a “Get Started” option. Select this option to delete the current update and to move towards the previous build of Windows 10 that was compatible with your system.
    Return to the Previous Build

Solution # 4: Uninstall the Problematic Program

If you install programs from an unknown website, you need to change this attitude. Just check which program you have recently installed that started showing this error. Once you get it, uninstall it from the system to avoid this error.

  • Right-click the “Start” button and select “Control Panel” from there.
    Control Panel in Start Context menu
  • Here, select “Programs and Features” category.
    control panel menu
  • Now, select the problematic program from the list and click “Uninstall” option above.
    That’s all. It will fix the “Critical_Process_Died” error.
    Delete Problematic Program

Solution # 5: Corrupt Registry Cleaning

Evil or corrupt registry can also be a major reason for this error. You need to repair the damaged registry. I would recommend a third-party registry cleaner tool that is quite easy and friendly to use. It is known as “Auslogics Registry Cleaner“, and you can download it from Here.

  • Open the tool once you have downloaded and installed it. Now click “Scan” option to find the total number of invalid entries in Windows registry.
    Registry Cleaner Scanning System
  • Now select the “Repair” option to delete all of these invalid entries to clear the Windows registry.
    Delete invalid registry

Solution # 6: Disk Cleanup

Occasionally, when you do not clean the junk files from your system regularly, these junk files cause slowing down the system or cause showing this error. You need to delete all of the temporary files to fix this error. Moreover, it will speed up your computer too.

  • Right-click the “Start” button and select “Command Prompt (Admin)” from the context menu.
    CMD Admin in Start
  • Type here “cleanmgr” and press Enter. You will see a pop-up window to select the drive for cleanup. Usually, the Drive “C” is Windows Drive. So, you need to choose “C” Drive.
    Disk Cleanup Utility in Command Prompt
  • Now the Disk Cleanup utility will calculate the total space you can free up by deleting the junk files from the “C” drive. You need to have some patience because it can take some time in calculation process depending on the size of the data.
    Calculation of Occupied Space
  • In the next Window, you will see the list of the junk files. Select all of the checkboxes to delete the files and click “OK” at the bottom of the window.
    List of Junk Files To Delete

That’s all guys! I have provided you all of the best possible solutions to resolve the “Critical_Process_Died” error. If you are still facing the error even after applying all of the above-discussed fixes, just reinstall Windows. A fresh copy of Windows will get you out of this annoying situation.

Solution # 7: Run DISM

There may be something corrupt in the Windows System image. That results in an unserviceable Windows image. You need to run the DISM utility that is actually the short form of “Deployment Image Servicing and Management Utility. Shortly, it is called DISM. If there is any corruption in the System image, that also causes this error. So, repair it by using the following method.

  • Right-click the Start button and select “Command Prompt (Admin) from its contextual menu.
    CMD Admin in Start
  • In the Command Prompt, type the command “dism /online /cleanup-image /checkhealth” and press Enter.
  • Wait for a while until it detects any corruption in the System Image.
  • Now type another command “dism /online /cleanup-image /scanhealth” and press Enter.
    it will start the scanning of all tools to detect any corruption.
    DISM Utility in Command Prompt
  • When it finishes the process and displays the final verdict, now again type another command “dism /online /cleanup-image /restorehealth” and press Enter.
    RestorHealth in DISM
  • It will repair the corrupt System image quickly. Now restart the system to run an error-free Windows.

Solution # 8: Uninstall Drivers

There may be a missing or corrupt driver that is displaying this Blue Screen of Death error time and again. You need to uninstall the drivers you have recently updated.

  • Go to the Start button and right-click on it. It will show you the context menu where you need to select the “Device Manager.”
    Device Manager in Start menu
  • In the Device Manager Window, click the first device to expand it. Now right-click one driver and select “Uninstall” option.
    Uninstall Device Drivers
  • Follow the same step to uninstall all of the recently updated drivers and reboot the system. When you restart the system, and the system checks the Windows for errors, it automatically installs the missing drivers.

Solution # 9: Update All Drivers

You need to update the drivers of all of the devices to fix this error. Sometimes, the current version of any device driver is corrupt. Seldom, a driver is corrupt, broken or missing. So, you need to update all of the Drivers. You can do so by using the following methods.

Visit the Manufacturer’s Website

The most authentic way to update the drivers is to download the latest drivers for all devices of your system from the manufacturer’s website. Usually, you can find the drivers in the “Support” section of the site. Go there and download the drivers to your system and install them.

Update Drivers by Using Driver Easy Tool

There is a third-party tool you can use to update the drivers quickly. If you want to follow a hassle-free solution, this is a lot better for you as compared to the above-discussed method. It consumes a lot of time to visit the official site of the company and search for the proper drivers. Then download them manually. If you do not want to follow a lengthy procedure, just use this third-party tool that is known as Driver Easy. You can download it from Here.

  • Once you download it, just select “Scan” option to start the scan. Wait for some time. It automatically fetches the updates of the drivers and detects the missing or corrupt drivers quickly.
    Driver Easy HomePage
  • Now select the “Update” option before one driver to update it. If you are a Pro member of Driver Easy tool, you can use the “Update All” option to update all of the drivers at once. But in the free version of this tool, you need to update every driver one by one.
    Update the Drivers in Driver Easy

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here