How to Fix 0x80070057 Windows Update Error

While installing the Windows updates, you see an error message “Error 0x80070057.” It shows that there is an error that stops an update from installation. There may be different reasons behind this error. A corrupted system file may behind it, or it may be due to any malware. Whatever is the reason, it is one of the most common errors in Windows Vista, Windows 7, 8 or 10. Here, I am going to discuss a few useful tricks you can apply to fix this problem. All of these solutions are tested. You can apply all of them to get rid of the error.

Related fixes:

Advertisements
Watch Movies by downloading free showbox app for android devices

10 working ways to fix error 0x80070057

1. Run System File Checker Utility (Most Working Solution)

There may be a corrupt or defective system file behind this issue. So, you need to run the System File Checker utility in Windows. It scans and detects the corrupted system files and repairs them automatically. Follow the instructions below to run SFC scan.

Press “Windows + X” keys to launch the WinX menu of the Start button. Select “Command Prompt (Admin)” from here.

In the Command Prompt window, type “sfc /scannow” and press Enter to start the scan.
Now, wait for some minutes as the verification process is going on. In fact, the system starts scanning the damaged files and repairs the culprit. Once it reaches 100%, it will be over.
System File Checker scanning(Here, you need to be very attentive towards the message the system displays at the end of the scan. If it shows a message like “Windows Resources Protection found corrupt files but was unable to fix some of them,” it means you need to use a third-party tool that could repair the culprit system files.

I would recommend “SFCFIX 3.0” in this context. It is a handy tool. If the System File Checker, the built-in tool is unable to fix any error, use SFCFIX 3.0 that is very powerful to repair the system files errors. Click Here to download it.

It does not take much time in fixing the errors. Just run its scan, and that’s it. Rest of the functions are its responsibility.

If no message appears at the end of the scan, just close the Command Prompt window and reboot the system. That’s it. Now again launch Windows Update and try another time to install the update that was showing error. I hope this time you will install it without any error.

2. Modify the Decimal Setting

When the Decimal settings are corrupt, they can cause showing this error. If you are using a language other than English, you may get this error due to the corrupt Decimal settings.

Here is how you can reset it to default by using the following instructions.
Go to the “Control Panel” and select “View by: Category” as shown in the image below.
Now select “Change date, time, or number formats” option from “Clock, Language, and Region” category.
Clock, Language and Region categoryHere, in the “Formats” tab, you need to select the “Additional Settings” option.
Additional Settings TabYou will see here “Decimal Symbol” option with a drop-down menu. Select “dot” from the drop-down menu and click “OK” twice to save your preferences.
Decimal Symbol CategoryNow close the window and reboot the system.

3. Restore Missing Repository for Windows Update

There may be some missing or damaged repositories that are causing this issue. Henceforth, you need to restore the missing repository for Windows Update by using a third-party tool. It is an online tool and known as “Reimage Plus.” You need to download it from Here and run its scan. It will automatically fix the damaged repositories for Windows update and thus, get you rid of this error.
Reimage Online Repairing ToolClick Here to download Reimage Plus. Reboot the system once you have finished the scan with Reimage Plus.

4. Registry Editing

Use this trick to resolve the issue even if you are not an expert in Registry Editing. Yes, you do not need to go to the Registry Editor and to follow a long process. You can edit the registry by using notepad too. Here is how to do so. Just follow the instructions below, and that’s all.

Press “Windows + R” keys together to launch the Run dialogue box. Now type here “Notepad” and click “OK” to proceed.

When the notepad page is opened, just copy the following command from here and paste it in the notepad.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\UX]
“IsConvergedUpdateStackEnabled”=dword:00000000

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\UX\Settings]
“UxOption”=dword:00000000

The screenshot below explains what to do.
Registry Editing By Using NotepadNow click “File” and select “Save As” option from here. You need to save this notepad file as “wufix.reg.”

Whenever you are using Windows Update utility to fetch updates, and you see the error “0x80070057,” just run this file, and the error will be no more appear.

5. Reset Windows Update Utility

Click Here to download a tool that could reset Windows Update Utility in your system.
It is a zip folder, and you need to extract the files from this folder. When you get the script, just run it as an admin. It will successfully fix the “Windows Update error 0x80070057.”

6. Rename “SoftwareDistribution” Folder

In the C drive, there is a folder known as “SoftwareDistribution” where Windows Update utility saves all of the updates cache memory. Sometimes, this folder causes showing this error. So, you need to fix the culprit by renaming this folder. Here is how to do so.

Right-click the Start button to display the WinX menu. Select “Run” from here. Now type here “%SystemRoot%” and press Enter to go ahead.

It will show you the directory where you can search for the “SoftwareDistribution” folder. Scroll down the alphabetically ordered list to get it. Once it is found, right-click on it and select “Rename” from the context menu. Now type “SoftwareDistribution.old” and press Enter to save its new name.
SoftwareDistribution in Windows(If it shows error in renaming the folder “SoftwareDistribution,” you need to check the Windows Update service.

Go to Cortana search bar and type “Services” here. Select “Services” as it appears in the search results.

Now look for “Windows Update” service. You will see it “Stopped” in the list. Click “Start” to run this service. Now again try to rename the SoftwareDistribution folder. This time you will rename it without any error.

Close the “Windows” folder and reboot the PC. Once again try “Check for Updates” option. I am sure this time it will work without showing errors.

6. Use DISM Utility

The Deployment Image & Serving Management Utility is very useful to restore the system file health. Just follow the steps below to use the DISM utility.

Go to the “Start” button and right-click on it to display the WinX menu. Select “Command Prompt (Admin)” from here.

Now type “DISM /Online /Cleanup-image /RestoreHealth”, and press Enter key to start the process. This tool automatically replaces the corrupt system files.
RestorHealth in DISM(If it hangs at 20% or 25%, do not close the window. Wait for some moments, and you will see it continues again. Once the process is over, close the window and reboot the system.
When you are login to the account, you need to launch the Command Prompt(Admin) once again. Type “sfc /scannow” and press Enter. It will work now, and your system is error-free within no time.

7. Use Microsoft SURT

The “System Update Readiness Tool” is known as SURT. It is for Windows 7, 8 and 10. Click Here to download this tool.

Once you have installed this tool, check for updates again. In the presence of the SURT, there will be no “0x80070057” error. It will go on smoothly.

Solution #8: Change Ethernet Cable

It may be due to a faulty or damaged Ethernet cable that you are getting this error. So, you need to change the cable quickly and see if it fixes the error.

9. Turn off Windows Firewall & Antivirus Program

Seldom, you are installing Microsoft Office, and you see the “Error Code 0x80070057” appearing on the screen. So, you are unable to move ahead due to this error. It shows that there is some error due to the Firewall settings. You need to disable Windows Firewall for some time. Although it can be risky, you do not have any other option except it. So, disable it temporarily until you finish the installation of Microsoft Office. Follow the instructions below in this context.

Right-click the Start button and select “Control Panel” from its WinX menu.

Now select “System and Security” category from here.
System and Security Category in Control PanelYou need to choose “Windows Firewall” feature here.
Windows Firewall in Control PanelIn the left pane, there will be an option “Turn Windows Firewall on or off.” Click it to proceed.
Firewall Enable or Disable optionNow, check the radio buttons for “Turn off Windows Firewall (not recommended)” and click “OK” to save your preferences.
Disable Firewall

10. Turn Off Antivirus Program

Sometimes, the antivirus program blocks the installation process of any program. So, you need to turn it off for a while. After installation, you can Turn on Antivirus program. Do the followings in this context.

Go to the “notification tray” on the Taskbar and right-click the antivirus icon.

Now select “Disable Shields control” for your desired time.
Antivirus DisabledOnce again run the Microsoft Office. I am sure it is not showing error now. It will go on smoothly. That’s all buddies! Now you can easily fix the error 0x80070057 whether it appears during the installation of Microsoft Office or Windows.

LEAVE A REPLY